China LED T10 tube light housing Factory

In the extrusion production of aluminum profiles, common defects are relatively intuitive, such as bending, twisting, deformation, slag inclusion, etc. The defects of "adsorbed particles" are difficult to find without careful observation or touch. The harm is: in the production process of electrophoresis and spraying profiles, it is difficult to remove them, which affects the appearance of the profiles and causes waste products.  In the extrusion production of aluminum profiles, common defects are relatively intuitive, such as bending, twisting, deformation, slag inclusion, etc. The defects of "adsorbed particles" are difficult to find without careful observation or touch. The harm is: in the production process of electrophoresis and spraying profiles, it is difficult to remove them, which affects the appearance of the profiles and causes waste products.  

In this regard, our JE company combines years of experience in aluminum extrusion production to analyze as follows: One of the causes of corrosion spots。

Based on our many years of production experience and the inspection of various process parameters in the production of aluminum alloy profiles, as well as the follow-up investigation of the operator's execution of the process, the following are the three causes of corrosion spots.

Both PC and PMMA are transparent plastics. In the case of the same thickness and the same raw material particles, the light transmittance of PMMA is 2-3% higher than that of PC, close to 90%

In order to meet the market demand, our company has recently launched an all-plastic T8 integrated lamp shell, two-color structure, porcelain white bottom, semi-circular light-emitting surface, transparent mask, milky white mask for the light-emitting surface, or customized colors according to usage needs.

The differences between LED plant growth lights and ordinary lighting lamps are as follows。