T8 Tube Housing

1. Products Introduction

As a high-tech enterprise in China, JE specializes in the production of LED T8 tube housings, LED T5 tube housing, LED T10 tube housings, LED T12 tube housing, etc. This is a T8 tube housing with an all-plastic tube on the outside and an aluminum profile on the inside. The size of the PCB board is 10*1mm. The height of the built-in power supply does not exceed 12mm. The installation method of the plug is divided into two types: screwing and gluing. , The screw plug with pin is not waterproof. The glued plug has a waterproof nut, which can achieve the waterproof level of IP65. Generally speaking, in terms of heat dissipation, the wattage of waterproof lamps should be lower than that of non-waterproof lamps.

2.Product Parameter (Specification)

3.Product Feature And Application

T8 tube housing is mainly used for manufacturing T8 lamp, T8 lamp can be used for the main lighting of shopping malls, parking lot lighting, school classroom dormitory lighting, factory lighting and so on

4.Product Details

More details of this T8 tube housing:

5. Product Qualification

As a professional manufacturer of LED aluminum profiles and LED plastic profiles, the following are our main machines:
1.20 Plastic extruder
2.5 aluminum extrusion press,
3. Professional integrating spheres test whether the lamps made by our lighting kit can meet the various indicators required by customers,
4. Professional standard light source testing equipment for testing the light transmittance and other properties of plastic lampshades.
From aluminum-plastic raw materials to extrusion production lines, from sample quality control to mass production control, from powerful perfect packaging to wholehearted service, JE always focuses on product quality.

6. Deliver,Shipping And Serving

7.FAQ

Q1. Can Your products be installed under the cold weather?

Re: Yes, Weather resistance of PC is -40 degree to 120 degree.

Q2. What kinds of LED lighting can use your profiles?

Re: LED cabinet lighting, LED strip lights, T5/T6/T8/T10/T12 tubes, tri-proof tubes and special-shape tubes, etc.

Q3. How do you ensure leading time?

Re: We have a professional Product Material Control(PMC) department, all orders are arranged by system.

Q4. Is the mold opening cost borne by the customer or your factory?

Re: Customer pay the cost first, after the quantity is more than 50000 meters for total order, the tool cost can be deducted in order.

Q5. How do you ensure quality?

Re: At first, we use new raw material all with environment protection certifications, please be sure we don’t use any re-product raw material.

Second, we have a professional Quality Control department,  both samples and finished products must be confirmed by QC before shipment.