English
Home > Products > T12 End Caps for Retrofitting

China T12 End Caps for Retrofitting Factory

Our pursuit and company goal is to "Always satisfy our customer requirements". We continue to develop and design superior quality products for both our old and new customers and achieve a win-win prospect for our clients as well as us for T12 End Caps for Retrofitting,T12 End Caps for Fluorescent Tubes,Long-lasting T12 End Caps,T12 End Caps for Easy Tube Replacement,T12 End Caps for Energy Efficiency, Never-ending improvement and striving for 0% deficiency are our two main good quality policies. Should you need anything, do not hesitate to call us.
T12 End Caps for Retrofitting, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.

Related Products

Hot Products

  • Recessed Mounted LED Aluminum Profiles 11.8*11.8mm Hole Size

    Recessed Mounted LED Aluminum Profiles 11.8*11.8mm Hole Size

    JE is a professional manufacturer of LED aluminum profiles and LED tube housings in China, a high-tech high-quality supplier, with 20 plastic extrusion machines and 5 aluminum extrusion machines, and the products produced are of various styles and stable quality. The recessed mounted LED aluminum profiles 11.8*11.8mm hole size is mainly used for LED light bars with a maximum width of 8mm. Installing the light bar in the profile can help the light bar to be waterproof and dustproof, thus prolonging the life of the light bar. JE can provide LED aluminum profiles for various light bars, please feel free to consult us.
  • LED Surface Mounted Aluminum Profiles with Lighting Three Sides

    LED Surface Mounted Aluminum Profiles with Lighting Three Sides

    JE is a high-quality supplier of LED aluminum profiles and LED plastic profiles in China, a large-scale factory in the aluminum extrusion industry, and a leader LED aluminum profiles for LED linear lighting. Our LED aluminum profiles cover a wide range, basically including all styles in the industry. This LED surface mounted aluminum profiles with lighting three sides is used for LED strips up to 16mm wide. Please kindly contact us for more information, we sincerely hope to cooperate with you soon.
  • LED T8 Plastic Housing PC Outer Tube and Inner Aluminum

    LED T8 Plastic Housing PC Outer Tube and Inner Aluminum

    JE is a one-stop manufacturer of LED tube housing supplier in China who have 20 plastic extrusion machines and 5 aluminum extrusion machines, our products are exported to Europe, America, Australia, Southeast Asia and other regions, providing our customers with professional LED tube housing solutions. This LED T8 plastic housing PC outer tube and inner aluminum can emit light up to 240 degrees. This special luminous surface design structure can meet some specific projects. Our company has hundreds of LED tube housing styles, if you have any needs, please contact us, we sincerely look forward to working with you.
  • IP65 Tri-proof Fixture

    IP65 Tri-proof Fixture

    The IP65 tri-proof fixture produced by JE, can fully meet all IP65 tri-proof lights factory requirements, and the service life of lamps can be greatly improved. At the same time, our production technology and creative aspects of manufacturing process keep up with the pace of scientific and technological development, we can provide OEM and ODM services according to different requirements of customers, and provide customers with satisfactory lighting solutions. The design and development of the IP65 tri-proof fixture enclosure is an extension of the ordinary lamp enclosure. Because in some special occasions, such as warehouse lighting, cold storage lighting, corridor lighting, gas station lighting, industrial lighting and other projects, the lamps are required to have the functions of waterproof, dust-proof and anti-corrosion.
  • LED T12 Housing

    LED T12 Housing

    The LED T12 Housing is a regular product of JE. The production process of LED T12 housing is very mature and the quality is very stable. LED T12 housing is usually made of plastic or aluminum alloy material. Among them, the materials used in plastic covers are usually polymer materials such as polycarbonate or polyformaldehyde resin, which have the advantages of being lightweight, impact-resistant, waterproof, dustproof, and heat-insulating. The aluminum alloy profile has higher corrosion resistance and thermal conductivity, so it can better protect the LED light source and extend the service life of the LED T12 lamp. It is a choice often used in outdoor places. In addition to LED T12 housing, our company can also provide T5 tube casings, T8 tube casings, T10 tube casings, etc., which can provide very professional solutions for your tube and casing projects. If you need anything, please feel free to contact us.
  • LED Fly Killer Light Housing

    LED Fly Killer Light Housing

    In recent years, JE, a manufacturer specializing in LED tube housings in China, has achieved remarkable success in the design and development of LED fly killer light housings, tailored to client project needs. LED fly killers have experienced rapid development in recent years, with both technology and the market continuously advancing and expanding. They effectively trap flies, mosquitoes, and other flying insects using specialized UVA light, making them particularly suitable for use in food processing, restaurant kitchens, hospitals, and hotels, where hygiene requirements are paramount. If you have any questions regarding LED fly killer light housings, please feel free to contact us.
  • Related Blog
  • Reviews

  • Causes of LED light Damage

    This article describes the causes of LED lamp damage

  • Chinese New Year Holiday of JE Lighting

    Friendly reminder, our Chinese New Year holiday is from January 7th to January 30th.

  • A major breakthrough in PC extrusion production

    After years of PC extrusion experience in our JE company, for a very large number of products, the company's technical department has overcome difficulties and invented a production method of one out of two, that is, one production line to produce two products.

  • How does plastic extrusion work

    Plastic extrusion is a high-volume manufacturing process that involves the homogeneous melting of thermoplastic materials. This molten material may be in granular, powdered or granular form. Under sufficient pressure, the molten material separates from the forming die holes. So, how does plastic extrusion work? It can be broken down into four main steps. Today we mainly talk about the first two steps.

  • Optical performance parameter requirements for LED tube design

    These are optical performance parameter requirements for LED tube design

  • We produce with dedication, we serve with heart.

    With the 2026 Spring Festival approaching, JE factory's PC diffuser production orders have surged, increasing by 120% compared to the same period last year, making our already packed workshop even busier.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept