New product release - T12 tube housing with PCB board width of 25.5mm

In order to meet more use fields of customers, our company has launched a new T12 all-plastic insert aluminumtube housing; its diameter isФ38MM, thehousing is extruded from new PC raw materials, and the bottom is porcelain white, which can make the inserted aluminum And the built-in electronic components are not exposed; the light-emitting surface is available in transparent and milky white, the built-in aluminum material is thick, and the heat dissipation is good; the matching PCB board width is 25.5MM, and the wide board design can better conduct the light source to the light source. On the aluminum material, thus ensuring good heat dissipation performance, so that the light decay of the light source is smaller and the service life is longer. Size drawing:

This product can be used as a conventionalLED tube or a waterproofLED tube, so it is equipped with two kinds of plugs: one is a conventional G13end cap; the other is a waterproofend cap, which can reach a waterproof level of IP65 or higher.

G13 end caps:

Waterproof end caps:

Specification:

T12

PC Tube + internal ALU

OD:38MM

Fixed with screw

PCB size: 25.5*1.0mm

Driver Height<16mm

PC color: transparent/ diffuser

This product can be used in parking lots, meat processing, farms, food processing plants, low-temperature storage rooms, department stores, etc. It can be waterproofed above IP65, can be directly cleaned, and can be used as a special lamp for slaughter production lines; it can also be used in humid The plant production base will not get wet and water; it can also be used in agricultural places such as pastures and farms.

JE is a factory specializing in the production of T12 tube housings, for moretube housings, please refer to:

https://www.jeledprofile.com/led-tube-housing

For more details, please contact:sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163