LED T8 Tube Housing PC Tube and Internal Aluminum Profile

1. Products Introduction

As a regular product of JE, LED T8 tube housing has been favored by the majority of LED lamp factories since its opening. The feature of this LED T8 tube housing PC tube and internal aluminum profile is that the shell is all plastic, but it is divided into two parts, the bottom part that does not emit light is white, and the part that emits light can be made into two kinds of milky white and transparent colors. There are aluminum profiles inside the lamp tube, which can be used for PCB size of *10*1mm. The power supply can be built in, but the height of the power supply cannot exceed 12mm.

2.Product Parameter (Specification)

3.Product Feature And Application

The T8 tubes made with this LED T8 tube housing PC tube and internal aluminum profile are mainly used in factories, supermarkets, large shopping malls, convenience stores, offices, parking lots, and more.

4. Product Details

More details of this LED T8 tube housing PC tube and internal aluminum profile:

5. Product Qualification

As a LED Aluminum Profile and LED plastic profile professional manufacturer, here are our main machines:
1.20 plastic extrusion machines
2.5 aluminum extrusion machines,
3.A professional integrating sphere to test whether the lamps made by our lamp kit can meet the various indicators required by customers,
4.A professional standard light source testing equipment for testing the light transmittance and other properties of plastic lampshades.
JE always focus on product qualification from aluminum and plastic raw material to extrusion production line, from samples quality control to mass production control, from strong perfect package to whole-heart service.

6. Deliver,Shipping And Serving

7.FAQ

Q1. Can Your products be installed under the cold weather?
Re: Yes, Weather resistance of PC is -40 degree to 120 degree.

Q2. Will the product deform during transportation?
Re: No, please be sure our professional package.

Q3. Where is your factory located?
Re: We are located “World manufacturer” Dongguan city, Guangdong province, China.

Q4. Is the mold opening cost borne by the customer or your factory?
Re: Customer pay the cost first, after the quantity is more than 50000 meters for total order, the tool cost can be deducted in order.

Q5. What is process of OEM order?
Re: Receiving drawing--Project manage confirm all production details with customer--Receiving tool production PO--Sales assistant proceed tool production--QC confirm samples are ready for shipping--Project manage confirm products with customer about every details-- start the regular order..