> News

News

Matters needing attention before extrusion production of aluminum profiles for LED tube housings

JE company extrudes a lot of aluminum profile on the machine every day. Are you curious about how our company ensures the quality and stability of aluminum extrusion? In fact, every step of the extrusion process is very important. Today, the editor will introduce to you the precautions before the al......

The solution to the cracking of the PC diffuser in the LED tube housing

We discussed the causes of cracked PC diffusers, so is there a way to fix it? Our JE company has more than ten years of PC cover extrusion experience to tell you that in order to avoid lampshade cracking.

The third reason for the cracking of the PC diffuser in the LED tube housing

Why does the PC lampshade crack? We talked about two of the reasons before, this time we will analyze the third reason.

The second reason for the cracking of the PC diffuser in the LED tube housing

Why does the PC lampshade crack? Last time we talked about one of the reasons, this time we will analyze the second reason.

One of the reasons for the cracking of the PC diffuser in the LED tube housing

Some guests may ask, why did the PC diffuser we bought from other stores crack after being used on the tubes for a period of time? What causes the PC diffuser to crack? Because the diffuser is mainly used for LED lamps, various problems will occur in the process of ordinary use, especially cracking;......

The third reason for the formation of adsorbed particles in the aluminum profile of the LED tube housing

The influencing factors of "adsorbed particles" are mainly three aspects: mold, cast rod, and extrusion process. The operation level of operators is also reflected in these three elements. On the basis of production practice, constantly analyze problems and summarize experience. It can reduce or avo......

<...35 36 37 38 39...48 >