> News

News

What is the difference between LED plant growth lights and ordinary lighting

The differences between LED plant growth lights and ordinary lighting lamps are as follows。

Eight characteristics and advantages of LED tubes

This article mainly describes the eight characteristics and advantages of LED tubes.

Isothermal LED aluminum profile extrusion process

Isothermal LED aluminum profile extrusion process: As the name suggests, the so-called isothermal extrusion is a combination process of temperature and extrusion speed while maintaining a consistent temperature at the outlet.

Problems that may arise during the execution of low-temperature high-speed extrusion process

Two problems will arise during the execution of the low-temperature high-speed LED aluminum profile extrusion process.

Low temperature and high speed LED aluminum profile extrusion process

Low temperature and high speed is to use a lower aluminum rod temperature and the fastest extrusion speed process combination to carry out the LED aluminum profile extrusion process.

What active elements are affected by spot corrosion of LED aluminum profiles

The zinc solid dissolved in the LED aluminum profiles accelerates grain corrosion in a "dissolution-redeposition" manner. The zinc or iron deposited on the alloy(LED aluminum profiles) surface as well as cathodic particles such as high-potential desolvation products FeSiAl and free silicon can act a......

<...30 31 32 33 34...63 >